Material Certificates from China CNC Shops: 3.1 vs 2.2

By CHX Metal Engineering Team · Published 2026-11-21

A material certificate is the paper that ties your parts to a specific melt. For metal orders we issue EN 10204 3.1 certificates with heat-number traceability back to the bar, under ISO 9001:2015 records kept for five years; 3.1 is the default on stainless and alloy steel, from MOQ 1.

A quarantine that dimensions could not explain

Start with an incident of ours. Two years ago, 3,000 stainless shafts left the plant dimensionally clean and went straight into the customer’s quarantine on arrival. Nothing had failed on their CMM. The problem was the paper: the heat number on the material certificate could not be matched to any marking on the bars the shafts were cut from, because the bundle tag had been discarded at the cut-off saw - which our own discipline at the time allowed. Two weeks of quarantine and a written corrective action taught us more about traceability than any certificate in a drawer ever had.

This page is the buyer’s side of the same lesson: what the certificate in the box actually proves, where the heat-number chain breaks, and the four patterns that turn a valid-looking document into a quarantine. Most of it can be checked from a desk before any order - the desk half of supplier checking is the 10-point vetting checklist.

What EN 10204 3.1 and 2.2 actually say

EN 10204 is the European standard for inspection documents, and the two types buyers meet are not interchangeable. A 2.2 is a statement of compliance issued by whoever supplied the material; a trader can produce one from the mill’s papers without testing anything. A 3.1 must be issued by the manufacturer’s authorized inspection representative, independent of the production department, and it carries real test results for a specific heat: chemistry from the melt analysis and mechanical values - tensile strength, yield, elongation - from samples of that same heat. 3.2 adds a third-party witness, which a few regulated programs ask for and most CNC work does not. The blunt reading: a 2.2 can be forwarded paperwork; a 3.1 was tested and signed on that melt.

What the certificate does not prove matters just as much. It says nothing about your part’s dimensions, its surface, or whether the shop machined the bar properly - dimensional evidence lives in the inspection report and first-article paperwork described on the inspection and FAI reporting page.

The heat-number chain, and where it breaks

Traceability is a chain of five links: the mill’s melt, the certified bar bundle with its heat tag, the cut blanks, the machined lot, and the box on the pallet. Each handoff can drop the tag. In practice most breaks land at two points - the cut-off saw, where the original bundle tag dies, and final packing, where parts machined from several heats on different days get merged into one carton for shipping convenience. Once either happens, the certificate in the box describes a heat nobody can point to.

Our discipline since that incident: every bundle’s heat is recorded onto a lot card that travels with the blanks through the shop; parts are boxed per lot rather than per machine, so one carton means one heat where the drawing requires it; the heat number is laser-marked on the part itself when the drawing has room; and the chain - certificate, lot card, shipping reference - is kept for five years. A test any buyer can borrow: pick a random bar in the stock rack, ask for its certificate, and check the stamped heat against the paper. If that fails unannounced, it fails on your order too.

Four ways the paper stops matching the parts

The generic certificate

Trader letterhead, a heat number that looks photocopied, no reference to your PO. It may be genuine - and it still proves nothing about the metal in your box, because it was issued against someone else’s shipment.

The unmarked part

The certificate names a heat, but neither the parts nor any tag carries it. Without a physical marking the chain ends at the paperwork, and incoming inspection has nothing to verify against.

The substituted grade

Chemistry out of spec, or a free-machining grade sold as the drawing grade. Portable XRF at incoming inspection reads nickel, chromium and manganese quickly but reads carbon poorly - separating 303 from 304 rests on sulphur, which XRF does catch, while a lab OES analysis settles it formally. Treat PMI as a filter, not a verdict.

The wrong condition

Right grade, wrong condition - T6 instead of T651, annealed instead of half-hard. Condition changes strength and machinability, and a certificate whose size or condition line does not match the delivery is a red flag on its own.

What to ask for in the RFQ

One line buys most of the protection: EN 10204 3.1, chemistry and mechanicals, heat number marked on parts or lot tags, certificate referencing your PO. For regulated programs, add PMI on incoming material or a lab report on the first lot. Unmarked dimensions can stay on ISO 2768-m; where a drawing names a critical feature, we hold ±0.005 mm, and the certificate chain sits behind the inspection report rather than replacing it. A supplier who cannot say clearly whether they issue 3.1 or 2.2 usually does not hold the stock records behind either - one more item for the desk check before the first order.

What we ship with the parts

Material certificates are part of the lot price, not an extra. Our plant in Shajing, Bao’an District has machined since 2013 - 220 machines: 100 machining centres with 30 of them 3+2, 50 CNC lathes, and 70 Tsugami Swiss-type units - with 100+ staff and capacity of 5 million pieces a month. Certificates cover everything from 316L and TC4 titanium to Kovar, from MOQ 1 upward, with prototypes in 3–7 days and production in 7–15. Shipping is EXW Shenzhen only - we are happy to recommend reliable freight forwarders.

FieldCHX Metal
LocationShajing, Bao'an, Shenzhen, China - 5,000 m² plant, 100+ staff, machining since 2013
Equipment220 machines: 100 machining centres (30 of them 3+2), 50 CNC lathes, 70 Tsugami Swiss-type lathes
Tolerances±0.005 mm on critical features; unmarked dimensions to ISO 2768-m; CMM and optical measurement
MOQ1 piece
Lead timesPrototypes 3–7 days; production 7–15 days; capacity to 5 million pieces per month
Materials6061/7075 aluminium, 303/304/316L stainless, TC4 titanium, H59 brass, Kovar, engineering plastics; ISO 9001:2015 and ISO 14001:2015 certified
QualityEN 10204 3.1 material certificates, heat-number traceability, records kept five years, first-article reports
ShippingEXW Shenzhen only - we are happy to recommend reliable freight forwarders.

Machining capacity behind this article

Address: Building B, 3rd Floor, Haosan Maozhoushan Industrial Zone, Buyong Community, Shajing Street, Bao'an District, Shenzhen  |  Tel: +86-755-27427365  |  Email: mc@chxmetal.com

Frequently asked questions

What is the difference between EN 10204 3.1 and 2.2 certificates?

A 2.2 is a statement of compliance from whoever supplied the material - a trader can issue one from the mill's papers. A 3.1 is issued by the manufacturer's authorized inspection representative, independent of production, and carries the actual chemistry and mechanical test results for a specific heat. For CNC parts, 3.1 is what ties the metal in your box to a tested melt; 2.2 can be forwarded paperwork.

Do you provide material certificates with every order?

Yes, on metal orders, and 3.1 is the default for stainless and alloy steel - there is no extra charge and no minimum, since our MOQ is 1 piece. The certificate carries the heat chemistry and mechanical values, and the heat number is traceable back to the bar stock. Certificates for plastics follow the resin producer's datasheet instead, which we state up front.

How can I verify that the parts match the certificate?

Check that the heat number on the certificate appears on the parts or their lot tags, then spot-check chemistry with portable XRF if the program warrants it. XRF reads nickel, chromium and manganese well but carbon poorly, so grade separation between near neighbours such as 303 and 304 rests on sulphur or a lab OES report. We box parts per lot so one carton maps to one heat.

Can you supply certificates for specialty alloys such as Kovar or titanium?

Yes. TC4 titanium, Kovar and 316L all arrive with mill certificates, and the certificate we hand over carries the same heat the parts were machined from. For glass-sealing grades like Kovar the chemistry matters more than usual - the expansion coefficient is the reason the alloy exists - so we keep the melt documents with the lot record.

How long do you keep traceability records?

Material certificates and lot traceability records are kept for five years, longer where a program requires it. That covers the certificate, the internal lot card linking bundles to blanks, and the shipping reference, so a question raised two years after delivery can still be answered from the file.

Send your drawings for a DFM review and a quotation

STEP, IGES, DXF, DWG or PDF — note the material, quantity and finish. Quotes usually go back within one working day. Email mc@chxmetal.com or use the quote form.