Protecting Your CNC Designs When Outsourcing to China

How files actually leak · what an enforceable NDA contains · which file formats are safe to send · practical controls before the first order

Last updated 12 November 2026. The legal references reflect Chinese contract and trade-secret law as applied in Shenzhen courts and CIETAC-style arbitration. This page is general guidance, not legal advice for your specific contract.

Designs leak through quiet reuse more often than through theft: a shop machines your bracket, likes it, and quotes it to the next buyer in your industry. Protection is layered: quote from the minimum file set (a drawing prices most parts), keep native CAD with feature trees until a supplier is chosen, sign an NDA with a no-reuse clause and a usable jurisdiction, mark tooling as your property, and re-search the market for your part numbers twice a year.

Buyers raise intellectual property in almost every first conversation we have, and the concern is reasonable: you are sending the geometry of your product to a factory 7,000 km away that you have never visited. What surprises most buyers is where the real risk sits. It is rarely an anonymous upload of your files to the internet within hours. It is the slow drift of your part into someone else's catalogue. This page is written from the supplier side of that table: it reflects how CHX Metal handles customer files and what we see go wrong on the buyer side, so you can put controls in place before the first STEP file leaves your computer.

How designs actually leak

ChannelHow it happensWhich control catches it
Quiet reuseThe shop quotes or makes your part for another buyer in the same industryNo-reuse clause in the NDA; periodic market search on your part numbers
Subcontracted processesPlating, heat treatment or wire EDM goes to a third party with your drawing attachedAsk which processes are in-house and which are bought out; require flow-down confidentiality
File sprawlYour model sits on six engineers' laptops after the quote, with no deletion disciplineSend the minimum file set; ask for file deletion in writing after an order is lost
Genuine exfiltrationAn employee sells the file setTrade-secret law and criminal exposure; an NDA plus attributable file markings help you prove it

Notice that three of the four channels have nothing to do with a criminal act. They are ordinary business behaviour without a rule attached. That is why the controls that work are behavioural and contractual, not technical: a watermark on a PDF stops nobody, but a supplier who knows you search for your own part numbers thinks twice.

What an NDA with a Chinese machine shop should contain

Most NDAs buyers send us are US or EU templates with a jurisdiction clause pointing to Delaware or Munich. Those are enforceable in theory through foreign-judgment recognition, but recognition of a foreign judgment in China is slow and uncertain. A clause naming a Chinese court or an arbitration body (CIETAC in Beijing, or the Shenzhen Court of International Arbitration) is cheaper to use when the counterparty sits in Shenzhen, and suppliers know it.

ClauseWhy it mattersCommon weakness
Definition of confidential materialNames drawings, 3D models, tolerance specifications, volumes and pricingDefines “documents” only; verbal specifications fall outside
No-reuse clauseForbids machining the design for other customers, not just keeping files confidentialMissing entirely; confidentiality alone does not stop reuse
Survival termThree to five years after termination is typical and enforceablePerpetual terms sometimes get trimmed by courts; five years survives
JurisdictionA forum you can afford to actually useHome-court clause that costs USD 50,000 to invoke
Tooling ownershipFixtures, soft jaws and programmes belong to the buyer and ship on requestSilent, so the shop keeps tooling hostage in disputes

China's Anti-Unfair Competition Law (2019 amendment) carries civil damages and administrative penalties for trade-secret misappropriation, and criminal liability for serious cases. That statute works behind the contract: it is why a supplier with a real business takes a signed NDA seriously even before anyone talks about suing.

Which files are safe to send for a quote

File typeWhat it carriesSend it when
2D drawing (PDF)Geometry, tolerances, material, finishAlways. It prices nearly every machined part.
STEP / IGESSolid geometry only, no feature treeFreeform surfaces, parts where wall thickness matters
Native CAD (SLDPRT, CATPart)Feature tree and design intentOnly after the supplier is chosen; not for first quotes
Full assemblyEvery mating part and the product architectureSend the single part, not the assembly, until contracts are signed

A drawing with tolerances prices a turned or milled part accurately at any competent shop. If a supplier refuses to quote from a 2D drawing and demands the native model, that is a data-handling habit worth questioning before you send anything.

Practical controls buyers use before the first order

Order of operations matters more than any single control. In sequence:

1. Reference-only drawing for the first contact: dimensions without tolerances, or with nominal values, so the supplier can cost the process but the part is not buildable from the file alone.
2. NDA before the real drawing: the signed agreement travels with the second file set, not the first.
3. Attribute your files: put your part number and company name in the title block and in a corner mark. Stolen geometry is harder to sell when it visibly belongs to someone.
4. Split the sensitive processes: give the threading specification to the shop but buy the special insert yourself, or have the finishing spec released only at the purchase-order stage.
5. Watch the market after delivery: search your part number and a photo of the part on Google Images twice a year. Quiet reuse shows up in Alibaba listings and factory catalogue pages, and catching it early is the difference between a cease-and-desist and a lost product line.

What CHX Metal does, and what we will not do

We quote from whatever file set you choose to send, and a 2D drawing is usually enough for us to price a turned or milled part within 24 hours. We sign NDAs on request, we work under buyer-supplied agreements, tooling built for your part is your property, and customer drawings do not move beyond the engineers quoting and running the job. What we will not do: we do not accept blanket perpetual-liability clauses that our insurer will not cover, and we do not quote parts where the drawing is watermarked as a test that we are expected to fail. If your legal team has a standard form, send it with the RFQ and it goes through before production files are opened.

Related guides

Vetting a China CNC Supplier: A 10-Point Checklist · How to Read a CNC Quote from a Chinese Machine Shop · Sourcing Swiss-Type Lathe Parts from China · MOQ in China: Three Minimums Hiding in One Quote

Frequently asked questions

The questions above are the ones buyers ask us in the first RFQ. If your situation sits outside them, for example dual-sourcing controls or a licence agreement that touches the part itself, put it in writing with the RFQ and we will answer what we can and defer the rest to your counsel.

Send your drawing, get a price in 24 hours

Upload a STEP file or a 2D drawing with tolerances and material. You get a priced quote with the process, the lead time and the inspection plan within one working day, and an NDA goes through first if you need one. Shipping: EXW Shenzhen only - we are happy to recommend reliable freight forwarders.

CHX Metal runs 220 CNC machines in a 5,000 m² plant in Bao'an, Shenzhen; tolerances hold at ±0.005 mm, MOQ is 1 piece, and prototypes ship in 3–7 days.