How to Read a CNC Quote from a Chinese Machine Shop
By CHX Metal Engineering Team · Published 2026-11-11
A usable CNC quote has eight lines: unit price, quantity break, material, tolerance callouts, finish, lead time, terms and validity. If setup, finish minimums or shipping terms are missing, the number you got is not a price - it is an estimate that will move. Audit each line before replying.
One page, and every line earns its place
A quote that arrives as a two-page PDF with a letterhead and a paragraph about the company is usually hiding its weakness in prose. The useful ones run under a page: part number, quantity, unit price, and then a handful of lines that state what the price assumes. That is the part worth reading slowly, because every assumption written down is a dispute you will not have later.
What follows is how we would read someone else's quote, line by line, if we were the buyer — including the lines that go missing and what each absence costs.
The lines that should be there
Unit price and a quantity break. One number for one quantity is half a quote. The second column — say 500 pieces, or 2,000 — shows where the per-piece curve flattens and lets you plan a reorder without re-quoting. If the break is missing, ask for it; the answer also reveals whether the supplier actually ran the numbers or guessed.
Material, stated as grade not description. "Aluminium" is not a material line. 6061-T6 and 7075-T6 machine differently and price differently, sometimes by a factor of three on the metal itself. A quote that says the grade proves the supplier read your drawing; one that says only the family usually means the drawing was skimmed.
Tolerance callouts. The quote should name the tightest tolerance it is pricing for. If your drawing has a ±0.005 mm bore and the quote is silent on tolerance, you are pricing a part that will be made to ISO 2768-m defaults and rejected at incoming inspection. This is the most common silent gap we see on quotes sent to us for a second opinion.
Finish, named with its batch logic. "Anodized" is not enough. Type II or Type III, clear or black, and — on small orders — who carries the finisher's batch minimum. Finishing is priced by rack and tank load, not by piece, and a quote that folds it silently into the unit price at ten pieces is promising something it cannot deliver.
Lead time, split. Prototyping and production are different schedules — here 3–7 days for first articles and 7–15 for production runs, with finishing days on top. A single "15 days" for everything usually means nobody separated proving from running.
Terms and validity. EXW, FOB or DDP changes what you actually pay by more than most unit-price negotiations do. And a validity date — 30 days is normal — matters because metal moves. A quote without one is priced on air.
The absences that cost real money
The expensive lines are the ones left out. Setup, when unmentioned, reappears at re-order: the first batch was priced to win the order, and the second carries the tooling honestly. Shipping terms left blank let the buyer assume DDP and the supplier assume EXW — we ship EXW Shenzhen only and say so on the quote, because a buyer discovering the term at the freight-forwarder stage plans around it, not argues it. First-article inspection, if not line-itemed, tends to be skipped when the schedule tightens, and skipped FAI is how a process drift reaches your goods-in bay undetected.
One more absence worth flagging: no revision reference. If the quote does not say which drawing revision it prices, a Rev B sent next month becomes a dispute about who changed what. Every quote we issue carries the file name and revision it was built from.
Three questions to send back
You do not need a negotiation to test a quote. Send three questions and read the quality of the answers. First: "What tolerance is this price based on?" — a real supplier answers with the number and the feature. Second: "What is the unit price at double the quantity?" — the delta tells you whether setup or material dominates. Third: "What is excluded?" — finishing minimums, freight, packaging, FAI. The third question sorts suppliers faster than any price comparison, because the honest answer has items in it.
For what goes into the number itself — the cost lines a shop actually builds up — there is a fuller breakdown in what sits inside a Chinese CNC quote, and the quote hub page covers how to get one started. This page is deliberately the buyer's side: what to check, not how the number was made.
What we put on our own quotes
Having audited incoming quotes for years before writing them, ours carry the eight lines above plus a drawing-revision note, a tooling line when it applies, and the finisher's batch minimum spelled out on small orders. The work behind them runs on 220 machines in Shajing, Bao'an, Shenzhen — 100 machining centres with 30 of them 3+2, 50 CNC lathes, 70 Tsugami Swiss-type — with critical features held at ±0.005 mm and unmarked tolerances defaulting to ISO 2768-m. The plant turns up to 5 million pieces a month with 100+ staff, so a quantity break is real arithmetic, not a rounding gesture. Terms are EXW Shenzhen only - we are happy to recommend reliable freight forwarders.
If a quote you are holding has lines you cannot map to any of the above, send it with the drawing and ask which line moved. Half the time the answer is setup; the other half it is a finish minimum nobody wrote down. A thirteen-year-old shop in Shenzhen has seen both, and once lost a fifteen-piece order over the second one, which is why it is on the paper now.
Machining capacity behind this article
- Equipment: 220 machines — 100 machining centres (30 of them 3+2), 50 CNC lathes, 70 Tsugami Swiss-type lathes.
- Tolerance: ±0.005 mm on critical features; anything unmarked defaults to ISO 2768-m.
- Volume: up to 5 million pieces a month; prototyping 3–7 days, production 7–15 days.
- Materials: 6061/7075 aluminium, 303/304/316 stainless, H59 brass, copper, TC4 titanium, carbon steel.
- Footprint: 5,000 m² in Shajing, Bao'an, Shenzhen; 100+ staff; founded 2013.
- Terms: EXW Shenzhen only — we are happy to recommend reliable freight forwarders.
Address: Building B, 3rd Floor, Haosan Maozhoushan Industrial Zone, Buyong Community, Shajing Street, Bao'an District, Shenzhen | Tel: +86-755-27427365 | Email: mc@chxmetal.com
Frequently asked questions
What should a CNC machining quote include?
Eight lines minimum: unit price with a quantity break, material grade, the tolerance the price assumes, finish specification, split lead times for prototypes and production, shipping terms, quote validity, and the drawing revision it was built from. Anything less is an estimate that will move.
Why do two quotes for the same part differ so much?
Usually tolerance and setup assumptions. One shop priced the ±0.005 mm bore, the other assumed ISO 2768-m defaults and did not check. Finishing minimums and bar-stock remnants explain most of the rest. Ask what each price assumes and the gap usually closes into two honest numbers.
Is a cheaper CNC quote always worse?
No, but an unexplained one is a risk. The difference is often setup amortisation choices or finishing batching, not quality. The test is whether the supplier can state what the price assumes, line by line, within a day. Vagueness on assumptions is the real warning sign, not the number.
What does EXW Shenzhen mean for my total cost?
EXW means the price covers the part at the factory door and freight from there is yours. Most buyers hand the shipment to a freight forwarder; we are happy to recommend reliable ones we ship with regularly. Budget roughly the freight and clearance on top of the quoted part price.
How fast do you quote and how long is it valid?
Quotes for turned and milled parts usually go back within one working day of receiving the drawing, and are valid for 30 days since metal prices move. Prototyping runs 3-7 days after approval and production 7-15 days.
Send your drawings for a DFM review and a quotation
STEP, IGES, DXF, DWG or PDF — note the material, quantity and finish. Quotes usually go back within one working day. Email mc@chxmetal.com or use the quote form.