CNC Machining Cost: China vs the US and Europe in 2026
Machine-hour rates · where the gap comes from · what freight and duty add back · when a local shop wins · a worked landed-cost comparison
Last updated 12 November 2026. Machine-hour ranges on this page are compiled from quotes we see in RFQs and from buyer-reported figures, checked quarterly. They are planning ranges, not quotations for your part.
A 3-axis milling hour prices at roughly USD 15-25 in Shenzhen, USD 45-75 in the US Midwest and EUR 50-85 in Germany or Switzerland in 2026. The machines are largely the same brands; the gap is labour and overhead per hour. Shipping and duty add 3-8 percent back on ocean freight, plus MFN and China-specific duty layers. China still wins on most machined-part volumes; a local shop wins when lead time, qualification cost or freight weight dominates.
Every buyer we quote in America or Europe is running the same comparison in their head: our price beside the local shop's, plus the freight line, plus the duty line, minus the headache. The honest answer is that neither column always wins, and the winner changes with the part. This page lays the comparison out the way we lay it out for our own customers: where the machine-hour gap comes from, what the logistics add back, and the four situations where we tell a buyer that a local supplier is probably the better call. It reflects how CHX Metal quotes from Shenzhen, and it is revised when the rate picture moves.
Machine-hour rates in 2026, region by region
| Process hour | Shenzhen (EXW) | US Midwest | Germany / Switzerland |
|---|---|---|---|
| 3-axis milling | USD 15–25 | USD 45–75 | EUR 50–85 |
| 5-axis milling | USD 25–45 | USD 75–120 | EUR 80–130 |
| CNC turning | USD 10–20 | USD 35–60 | EUR 40–70 |
| Swiss-type turning | USD 12–22 | USD 40–70 | EUR 45–80 |
Treat the ranges as planning figures for turned and milled components in the 10 mm to 300 mm class, in aluminium and stainless. Titanium, exotic alloys and tolerance bands inside ±0.01 mm move every region toward the top of its range, and the spread between regions narrows because material and programming dominate. The consistent finding across the quotes we see: the machine brand is rarely the difference. A Tsugami runs the same G-code in Shenzhen as it does in Ohio.
Where the gap actually comes from
Four inputs make up a machine hour: the machine itself, the operator, the plant overhead, and the margin. On the machine input the regions are close; a new 5-axis machining centre costs a similar amount whether it lands in Shenzhen or Stuttgart. The gap lives in the other three. Operator cost per hour in a Shenzhen plant runs a fraction of a US or Swiss wage including social charges. Overhead per machine is lower: land, buildings and the cost of capital differ. And because Chinese shops run two or three shifts, the machine's depreciation spreads across more hours, which lowers the hourly rate even when the annual output per machine is the same.
None of this closes soon. Labour cost in Chinese manufacturing has risen steadily for a decade and the gap has narrowed from the 80-plus percent of 2010 to the 50-65 percent typical now on machine hours. The direction is real; the residual is still decisive for most machined parts.
What freight, duty and fees add back
| Add-back | Typical size (US import) | Notes |
|---|---|---|
| Ocean freight + drayage | 3–8% of EXW value | Dense metal parts cube out slowly; LCL adds handling fees |
| Air / express freight | 15–30% | Prototypes and urgent orders; consolidation is the lever |
| MFN duty | 0–8.6% on most machined lines | Set by HTS line, not by origin |
| Section 301 / 232 layers | 7.5% + 12.5% typical, 232 by metal content | China-specific; see our tariff guide for current rates |
| MPF, HMF, entry, bond | USD 3–60 per entry, mode-dependent | Consolidate shipments to pay fewer entries |
| Inventory in transit | Cash tied up 25–40 days | Ocean transit plus clearance; costs working capital |
Add the add-backs to the EXW price and the effective landed premium over the factory price lands between roughly 10 and 45 percent depending on mode and HTS line. Even at the top of that band, the landed price of a labour-intensive machined part usually stays under the local quote. The exceptions are the next section.
Worked example: 500 aluminium housings, Midwest buyer
| Line | Local US shop | EXW Shenzhen + landed |
|---|---|---|
| Piece price, 3-axis milled 6061-T6 housing, 45 min cycle | USD 38.00 | USD 14.20 EXW |
| Freight (ocean LCL, 120 kg) | — | + USD 0.55 |
| MFN 8466 line at 2.5% + Section 301 (25% + 12.5%) | — | + USD 5.68 |
| MPF/HMF/entry amortised | — | + USD 0.12 |
| Landed piece cost | USD 38.00 | USD 20.55 |
| Cash timing | 2–3 weeks | 5–7 weeks door to door |
The landed saving is 46 percent on this part, and it is a realistic middle case: US duty at the current stacked rates eats into the gap meaningfully, and the answer still favours Shenzhen. Reverse the assumptions to a 12 kg stainless part on a 15 percent tariff-heavy line with air freight, and the gap can close to under 10 percent, at which point the qualitative factors below decide it.
When the local shop wins, and we say so
We turn down enquiries every month with a suggestion to source locally, because four situations recur:
1. Lead time rules: if the part is needed in ten days and cannot be air-freighted economically, a local shop with material in stock wins outright.
2. Qualification-heavy, low-piece-price parts: when aerospace or medical first-article qualification costs more than a year of production, a second source restarts the clock and the saving evaporates.
3. High first-iteration risk: parts that historically take two or three DFM rounds iterate faster with the engineer in the same time zone.
4. Large, low-density parts: freight on a 400 kg welded-and-machined frame is charged by volume, and the machining saving can disappear into the freight line.
A supplier who never names these situations is not giving you the whole picture, and the ones who do are easier to build a program with.
Comparing quotes honestly across regions
Three assumptions differ between any two quotes for the same drawing: the process plan, the tolerance interpretation, and the overhead. Ask every supplier, local or overseas, for the same three lines: machine class and estimated cycle time, the tolerance band they priced to, and the inspection points included. With those three lines matched, the residual difference is overhead and currency, and you can see it as such. Without them, you are comparing a process plan to a guess. Our guide to reading a CNC quote walks the full checklist.
Related guides
Importing CNC Parts from China to the US: Duty & Landed Cost · What Drives the Cost of CNC Machining in China · Lead Time and Shipping for CNC Parts from China · MOQ in China
Send your drawing, get a price in 24 hours
Upload a STEP file or a 2D drawing with tolerances and material. You get a priced quote with the process plan, the lead time and the inspection points within one working day, laid out so you can compare it line by line with your local shop. Shipping: EXW Shenzhen only - we are happy to recommend reliable freight forwarders.
CHX Metal runs 220 CNC machines in a 5,000 m² plant in Bao'an, Shenzhen; tolerances hold at ±0.005 mm, MOQ is 1 piece, and prototypes ship in 3–7 days.