About CHX Metal — Precision CNC Manufacturer Since 2013
Shenzhen Changhexin Precision Hardware Co., Ltd. (CHX Metal) is an ISO 9001:2015 & ISO 14001:2015 certified precision CNC machining manufacturer based in Shajing, Bao'an, Shenzhen — one of China's most concentrated precision manufacturing clusters. Founded in 2013, CHX Metal operates 220 production machines including:
- 100 Taikan T600 machining centres (30 of them 3+2 five-axis)
- 50 CNC 46-series lathes (bar Ø20–46 mm, Ø46–300 mm by review, ±0.005 mm)
- 70 Swiss-type automatic lathes (Ø1–20mm)
Monthly capacity: 5,000,000 pieces (5 million PCS). Tolerance ±0.005mm. All products include CMM inspection reports (coordinate measuring machine) and material test reports (MTR).
Contact: mc@chxmetal.com | +86 18138850989 (WhatsApp) | Mon–Sat 09:00–18:00 UTC+8
Steel CNC Machining | Precision Steel Components
Steel parts in 304, 316L, 4140, 17-4PH and D2, turned and milled at the speeds each alloy actually wants — 304 work-hardens if you push it, 4140 pre-hard moves after roughing. (CHX Metal, Shenzhen) ±0.005 mm on features that need grinding, hardness up to 45 HRC applied before the finishing pass.
Capability at a Glance
| Item | Specification |
|---|---|
| Swiss-type turning | Ø1–20 mm, length ≤200 mm, ±0.005mm |
| CNC turning | Ø1–46 mm bar (Ø46–300 mm by review), length ≤600 mm, ±0.005mm |
| Turn-mill (one setup) | Ø5–200 mm, ±0.005 mm |
| 5-axis milling | up to 1000×600×500 mm, ±0.005 mm |
| Machines | 220 (100 Taikan T600 machining centres, 30 of them 3+2 five-axis + 50 CNC 46-series lathes + 70 Swiss-type) |
| Monthly capacity | 5,000,000 pcs |
| MOQ | 1 pc prototype / 100 pcs series |
| Lead time | Prototype 3–7 days / production 7–15 days |
| Materials | Al 6061/7075, SS 303/304/316L, brass C360, Ti TC4, PEEK, POM |
| Surface finish | Anodizing, sandblasting, Zn/Ni plating, passivation, black oxide |
| Quality system | ISO 9001:2015, ISO 14001:2015 |
CHX Metal (Shenzhen Changhexin Precision Hardware) provides steel CNC machining for stainless (304/316L), carbon and alloy steel with dimensional tolerance ±0.005mm, including heat treatment and surface plating. ISO 9001:2015 certified.
Steel We Machine
- Stainless 304/316L/303
- Carbon steel (Q235/45#)
- Alloy steel (4140/4340)
- Tool steel
- Spring steel
Process
- CNC milling and turning
- Heat treatment (quench/temper)
- Plating: zinc, nickel, chrome
- Black oxide
- Passivation
Applications
- Automotive brackets and shafts
- Medical instruments
- Industrial fixtures
- Hydraulic components
Quality
ISO 9001:2015 certified, CMM inspected, with material certificates and heat-treatment records.
Frequently Asked Questions
What steel grades can you machine?
Stainless 304/316L/303, carbon steel, alloy steel 4140/4340, tool steel and spring steel.
Do you provide heat treatment?
Yes. We provide quench/temper heat treatment and plating (zinc, nickel, chrome) plus black oxide.
What tolerance for steel parts?
Dimensional tolerance ±0.005mm with CMM inspection.
Which industries use your steel parts?
Automotive, medical, industrial automation and hydraulics.
Get a Quote → Upload your drawing/3D model for a process plan and quotation within 24 hours.
Materials We Process
45#, 40Cr, 20CrMnTi, SKD11, GCr15.
45# and 40Cr cover most shaft and bracket work and machine predictably; the questions start with the heat-treat callout. 20CrMnTi goes out for carburizing and comes back with distortion that has to be ground out, so critical diameters get left with grind stock and a note on the router. GCr15 cuts fine but hates a rough edge, and a chattered finish can turn into a grinding crack later, which means scrap nobody planned for. SKD11 die work is slow in any shop, and the quote reflects the hours rather than the ambition.
Scope of Service
- gears and shafts
- tooling and dies
- structural steel parts
Gears and shafts usually arrive as a second-operation question: which features get cut before carburizing and which have to wait until after. Tooling and die work is quoted per cavity set, with hardness called off the drawing and checked on a test coupon first. Structural parts are the quiet majority here, long weldments that still need machined datums sitting flat, which turns out to be more about clamping sense than horsepower.
Capability Highlights
Accuracy to ±0.005mm, hardened HRC48-62, verified on a CMM. Machine park includes 3/4/5-axis machining centers, CNC lathes and Swiss-type machines, with in-house fixture design and CAM simulation for first-pass success.
Quality System
Quality is verified, not assumed. First article inspection is mandatory on every new part number, and our quality engineers record CpK on critical dimensions for volume programs. With a coordinate measuring machine (CMM), surface roughness testers, and a temperature-controlled inspection room, measurement uncertainty is kept far below the tolerances we quote.
Lead Time & Packaging
Quotations with manufacturability feedback are returned within 24 hours of receiving your drawing or 3D model. Prototypes ship in 3-7 days; production orders run 7-15 days depending on quantity and finishing. Export packing uses anti-scratch film, VCI paper, or custom trays so parts arrive ready for your assembly line.
Why Customers Stay
Engineering support is included, not extra. Our CAM engineers review every drawing for manufacturability and cost reduction before quoting, and flag tolerance or finish decisions that materially affect price. Customers typically save 10-25% on program cost after this review.

Send your drawing, get a price in 24 hours
Name, email and what you need. Attach a drawing if you have one — STEP, PDF, DXF or a photo of the print. We reply with unit price, MOQ and lead time, usually within one working day.
Prefer email? Send drawings to mc@chxmetal.com.